art impressions, Distress Inks, Distress Oxides, Florals, Long-stemmed Rose Bud, Long-stemmed Rosebud, Spring, Stencils, Tim Holtz, Water Colored Cards

Card Collaboration!

Have you ever collaborated to make a card?! I recently did just that with three stamping friends and together we created this gorgeous card! Let me tell you about it! I started the card (see below) and mailed it to Lynne. No one knew who would get the card next and after we each added our touch, we snapped a picture and mailed it onward!
Lynne chose the perfect image to go with the soft spring colors!
I’m loving this more and more! That ribbon next to the burlap is so unexpected and such a lovely contrast of textures and styles!
Theresa was the last one to receive the card and said she was a but unsure of how to finish it with a bang! But she nailed it! I’ve never used micro-beads before and I love the additional texture they contribute to the card!
I love all the vertical lines in a row; the beads, the twine, the rose stem, the ruffle and the burlap. And Hope accents it all beautifully and horizontally!
Here’s a final look at our creation! I hope this inspires you to choose some friends to collaborate with too! Thanks for visiting!
CTMH Stamps, Distress Oxides, Kuretake Zig Clean Color Real Brush pens, Tim Holtz, Winter

Fresh Powder!

2018-11-11 14.37.39
I am not a skier, and in fact, I’ve never skied in my life!  But I’m working on building my card stash for an upcoming Holiday Craft Show, and had to pull out this amazing set from Close To My Heart called Steep & Deep!  I love the simplified images of the skier and snowboarder and I began by heat-embossing them in black onto a Bristol Smooth card stock.  

2018-11-11 14.38.15
After embossing the snowboarder in black, I heat-embossed the snowflakes with clear powder.  My next step was to sponge on a heavy layer of Faded Jeans distress oxide ink, mainly around the edges and at the top, then went over it and added color to the center with Cracked Pistachio oxide ink.  I used a baby wipe to remove the excess ink from the snowflakes so they would pop!  After setting the inks with my heat tool, I dripped water onto the panel which left behind the wonderful mottled look to depict snowflakes!  

2018-11-11 14.38.22
I colored the snowboarder with Zig markers, then stamped the trees and sentiment using Versafine Onyx Black ink.

2018-11-11 14.37.53
I repeated the process for this card, then sponged some Black Soot oxide ink around the edges.  I  trimmed down the main panel to layer onto a piece of white card stock then mounted it to a black card base.  Coordinated stamped envelopes are always a must!  

2018-11-11 14.37.57
I think these cards are pretty cool and hope they’ll sell well at the craft fair!  Vermont has many skiers, so they should snap these up!  Hmmm….maybe I’d better make more!  🙂  Thank you for visiting!  

Brick Wall Background, Brutus Monroe, CTMH Stamps, Distress Oxides, Fall/Autumn, Hit The Brick background stamp, Kuretake Zig Clean Color Real Brush pens, Pumpkin Faces, Tim Holtz, Unity Stamps, Water Colored Cards

Inspiration

2018-09-30 06.53.48
As a stamper and card artist, I find inspiration in some unexpected places!  Like, at the Dollar Tree!  I found this gorgeous plate there last week and just love the artists watercolor style!  I had to have it, so it came home with me!  I knew right away that I’d use Brutus Monroe’s Pumpkin Faces set to make my card; it comes with TEN various sized and shaped pumpkins plus ten faces to add on!  Now, I like scary pumpkins as much as anyone, but how wonderful that I can use this set for an elegant card!  

2018-09-30 06.53.48-1
I stamped and heat-embossed the four pumpkins in silver, masking in order to layer them.  In retrospect, I wish I’d used dark gray ink instead.  Using the plate as a guide, I colored the pumpkins with a variety of Zig markers in shades of green, gray and brown, adding water to soften the ink.  My leaves and vines are from an old CTMH set called Grapevine and I think they beautifully complement the design.  I stamped them with Bundled Sage oxide ink.  

2018-09-30 06.53.48-1-1
At this point, I realized that Brutus Monroe’s Hit The Brick background would go perfectly so I inked it up with Bundled Sage oxide and gently maneuvered the stamp to fill in the space above the pumpkins.  That’s the beauty of flexible cling stamps!  I trimmed my panel with a Stitched Rectangle die then mounted it to a panel of dark gray.  On a piece of vanilla card stock, I stamped more of the vines and leaves with Bundled Sage again and attached it to a base card of Jurassic card stock.  

2018-09-29 08.57.24
When my card was complete, I made a coordinating envelope with more vines and leaves.  I’m pretty happy with my card and hope you like it too!  Now, I’m off to Dollar Tree to buy more of these plates!  And you should head straight to Brutus Monroe to check out these pumpkins!  😀

Brutus Monroe, Distress Oxides, Fall/Autumn, Nature, Simple Blend- Circle Stencil, Stenciled Cards, Surface Inks, Video Tutorial

Harvest Moon with Simple Blends

2018-09-17 16.10.27
Welcome friends!  I’m sharing a non-traditional autumn card made with only blue and black inks and my new Simple Blends Circle stencil by Brutus Monroe!  To begin, I placed the frame part of the stencil onto a piece of Bristol Smooth watercolor paper and lightly sponged Faded Jeans distress oxide ink around the edges of the circle cut-out to outline my moon, then added a little Black Soot as well.  Using a cool texture stamp (pictured below) I added the “moon shadows” with the same colors of ink.  I stamped the line of geese with Raven Detail ink.

2018-09-17 16.10.35
Next, I placed the circle stencil over the moon to cover it up, and heavily sponged Black Soot and Faded Jeans oxide around it to create a night sky.  It’s barely noticeable but I also lightly sponged a teeny bit of Zest just above the horizon line!  This wonderful tree is made by Stampendous from their Nature set and I heat-embossed it in black right over the panel.  I then added fine spatters of white craft paint to depict stars.

2018-09-17 16.10.41
Once my tree was in place, I got really excited for how awesome it looked!!  But it needed to be grounded, so I used a paper mask to create the hillside with Raven Detail ink then stamped the line of geese, also from the Stampendous set.  After cutting the panel with Stitched Rectangle dies, I mounted it to a piece of fun foam to lift it up and then onto an off-white base card.

2018-09-17 16.10.52
I LOVE how this card turned out!  I’m not sure if I’ll add a sentiment, but in the meantime, I’ll just enjoy it’s striking simplicity!  Now, I’m off to find yet another way to use my cool new stencil!  See Ya!  ***I added photos below of the texture stamp I used to create the shading on the moon.  I’ve had it for many, many years so am not sure it can still be purchased.  Made by Magenta.


Purchase this card at my Etsy Shop!


 

I’ve created this tutorial to help show you how I created this beautiful card. Be warned! I am super comfortable in the world of stamping. Video Creation and editing? Well, that remains to be seen!
 

 

Basic Labels, Distress Oxides, Fall/Autumn, Gina Marie Designs, Stampendous, Stitched Oval Dies, The Ton, Thinking of You, Tim Holtz, Tree Poem

Flames of Fall

2018-09-17 15.35.31
Yay!!  It finally cooled down to a lovely 64 degrees which means long pants, a light jacket and no more flip flops!  I’ve been having lots of fun making all my fall cards but doing so in hot weather isn’t quite as satisfying!  I made this beautiful card a few days ago using the Tree Poem stamp by Stampendous!  It’s such a striking image and I decided to add “leaves” of flaming colors!

2018-09-17 15.35.55
I started with a piece of Bristol Smooth card stock and heat-embossed the tree in black.  I then tapped some Faded Jeans oxide ink onto my craft mat, spritzed with water and pressed my card stock into it, moving it around to fill in mostly the edges.  Next I tapped a small acrylic block into Fossilized Amber oxide ink then spritzed it with water and “stamped” it onto the tree in several places.  This allowed me to control where the “leaves” went.  I repeated this step with Fired Brick and Carved Pumpkin oxides, adding some to the base of the tree as well.

2018-09-17 15.35.39
When my panel was finished, I die-cut it with Stitched Oval dies and mounted it to a vanilla base card which I’d run through the Cuttlebug with my Fall Leaves embossing folder.  I kept the overall design fairly simple so that the tree was the main focus!

2018-09-17 15.36.01
The final detail was to heat-emboss in black a sentiment from The Ton’s Basic Labels set onto a scrap of white cardstock then attach it to a strip of orange floral paper.  I lifted it with a bit of foam tape for dimension.  The leaves are just beginning to turn here but soon they’ll be aflame!  I hope you enjoyed this card and are inspired to play!

Brutus Monroe, Copics, Distress Oxides, Fall/Autumn, Friendship, Meadow Greens, Papertrey Ink, Simple Blend- Circle Stencil, Surface Inks, Tim Holtz

Hello Fall!

2018-09-13 13.15.16 (1)
Fall is taking it’s time getting to Vermont as we’ve been enjoying prolonged summer temperatures, but I’m ready for all things “fall”!!  I made another card using Brutus Monroe’s Simple Blend Circle stencil and paired it with Papertrey Ink’s Meadow Greens again!  To make this card, I placed the Circle stencil frame over a piece of watercolor card stock and filled in the center with Zest Surface Ink, making it darker around the edges and lighter in the center.  Next, I stamped some leaves from Meadow Greens using Versamark so I could clear emboss them.  When that was done, I spattered black paint over the panel then heat-embossed in black the “Hello Fall” sentiment directly onto the card.

2018-09-13 13.15.32 (1)
I set that aside in order to create my leaves by tapping out Fossilized Amber, Fired Brick and Carved Pumpkin distress oxide inks onto my craft mat, spritzed with water then pressed another piece of watercolor card stock into the ink, drying between colors.  Before I die-cut the leaves from the inked paper, I stamped the pretty script stamp all over the panel.  The little raccoon is from The Greeting Farm and I colored him with Copics then cut him out and mounted him with 3D Foam Squares.  The leaves were folded and attached in the same manner.

2018-09-13 13.16.14 (1)
Lastly, I embossed the “you’re my favorite” sentiment onto a strip of black paper then added that as my final touch!  A base card of Terracotta compliments the leaves and sets off the brighter colors beautifully!  BTW, did you notice my awesome new Brutus Monroe watermark??